Our psa is able to work without any pressure drop, and, moreover, even with increased water pressure, meaning they can help network pumps to pump water into the system. Therefore, when using our devices can use the power the pump with less pressure, and hence less power than in the case of paroutilizatorom, significantly saving on electricity. 5. On the mechanism of suppression Vibration In order to understand why we need it and how it should work, it is necessary to determine the cause of the vibration. In all, without exception, jet apparatuses vibration is caused by unevenness in distribution of flux over the cross section of the mixing chamber. Thus, the principle of anti-vibration is very simple – the better the blended environment, the less vibration. Particularly strong vibration is manifested in the apparatus in which working medium is water, that is when the water is fed to a central orifice and the flow of steam is sucked into a jet of water.

That is exactly what is happening in paroutilizatorah. In this case, the unevenness is obtained by the maximum, as central part of the flow (core flow) is a solid stream of water, and the peripheral part of the stream is steam. Under this option mix is bad, because the solid stream of water poorly dispersed, the surface area ground flow is obtained by a small, non-uniformity persists throughout the length of the mixing chamber and as a result of all this leads to vibration. Therefore, for vibration damping in paroutilizatorah necessary to apply additional tweaks – do condensing column, to the mixing chamber is not got a clean pair, and already pre-mixed with water or apply ejector design, or use centrifugal nozzle to swirl the water itself broke up into droplets.